Having a little trouble getting Picolog up and running on the Raspberry PI. Got it running on my Imac today. Yesterday it would not sample more than 1 sample. That kind of defeated the whole reason for setting this up. I only changed the sample rate from 1 per second to 500ms, and suddenly it starte...

1st I want to report with confidence that I returned the vehicle to the customer today. The vehicle sat at our shop for the course of a week with a new battery in it. No sign of a loss in battery charge over that time. I have the old battery still on my bench. Charged last Friday to 12.43 Volts and ...

This one is elusive. I did all the normal testing. Charged the battery fully. tested with both of our captive battery testers earlier in the week. I truly believe in running the headlights as suggested , watching what it does to Open Circuit Voltage. No sign of issue. Starts fine. None of the normal...

If you suspect battery, charge it and disconnect from auto. Check 2 days later. That is just too simple! I've got that battery fully charged again, and sitting on the bench for the weekend. Question - How valid is this test without a fixed parasitic draw? I'm thinking I should put a .030 Amp draw o...

I would need a lot more information to know If I can help you. What exactly do you want to do? Conversion? From what to what? More info is where we need to start.

Mab

Sorry! I know what you mean. I honestly bought it for the data logging only. I have plenty of really good DVOMs. Youtube had lots of videos but very little on the data logging feature. You have to do some wadding....Sorry again! But, I didn't want to spend the $300 on the data logging meter I wanted...

Screenshot of the new meter at work. I was able via bluetooth to download the saved memory and map it.

Not sure why but suddenly I'm getting one after another of these vehicles. Recently, got a 2002 Lexus RX300 with a battery that would die after a couple days. I looked at it, and no sign of a drain. Parasitic @ .04 amps. Nominal. Battery OCV @ 12.45 volts. I had just finished putting a slow charge o...

On day 2 of this testing. I made a roster of the individual drain points and realized 2 of them didn't need to be power at all time. re-wired those devices. I still have an average drain of 55ma but no chatter. Basically a straight horizontal line. The drain is very consistent with one single blip t...

I am currently working on a car that will kill the battery of this car in little over a week. I really tried to display a picture of the draw with my Picoscope. I just can't do it with any of the low current amp clamps I have in conjunction with my Pico 4423. I even had them rewired with no coiling ...