Hi and thank you for your post. Sorry for the difficulty you are facing. The ADC11 is a data logger (or more correctly an acquisition unit) that measures voltages from 0 -2.5V, it has multiple inputs. By using the terminal board you have the flexibility to do many things. Attenuating larger voltages...

Hi what version of PicoScope do you have and what command did you type in exactly.

Kind regards

Hi have you tried to increase the number of samples? Also you can increase the number of waveform buffers by going into Tools->Preferences.

Kind regards

Hi chris1234, The behaviour that you have observed is intentional and is related to the function of the probe multiplier. The scope display y-axis is simply rescaled to account for the reduction in amplitude that will result from a x10 probe, for example. The channel gain is not adjusted and therefo...

Hi and thank you for your post. I am not an expert in CAN bus however what I can say is that your transfer rate is 1Mb/s. Now depending on the number of bits you have in the signal then your baud rate would be 1000000/x (where x is the number of bits in signal). So you would need to know how many bi...

Hi just had a thought, the latest version of Microsoft Excel has the cell number limit increased from 65k to approximately 1Million. Hope this helps.

Kind regards

No Problem.

Hi and thank you for your email, unfortunately this 212 cannot physically go in fast streaming mode as it is a hardware limitation.

Kind regards

Hi could you send me the file with an example? I think it has been resolved but I would like to make sure.

Kind regards

Hi and thank you for your post. In order to help you more effectively I will require the following information: 1) What product are you using (the hardware) 2) What version of the software are you using? 3) What operating system are you using? 4) Could you send the wave form you saved so I can try a...