Hi Mathis,

Did you solve the problem? Im interested in the solution if you have it. Since it is 4-wires to the injector, I never tried them.

hello again.

the problem was a vacuumhose between the evap-valve and the intake.
easy solution but it didnt sound like a vacuum-problem car...

/jim

looked at your waveform posted on Z14XE, I agree it looks just like mine. So thats good. I will continue tomorrow, I will provide DTC and hopefully a solution tomorrow.

Thank you for your time!
/jim

Hello, Sorry about that. A little to eager maybe! :) Mostly wondering wheter it really can be that the flywheel is put back in the wrong position, or that the camshaftbelt has jumped, or something else.... It is a Zafira A, with a Z18XE engine. Took a photo today of the printout from the scope. nvm ...

Hi all! I think I have a problem, one of my mechanics at the shop replaced a crankshaftseal on a Opel Zafira, and clutch ofc. Fired it up to take a testdrive. The car almost didnt run on idle. Better at 3000 rpm. Suspected a damaged CKP-sensor, hooked up the pico, seems perfectly normal. Tested togh...

I just bought a Pico with 4 channels the diesel edition. I mainly work with heavy machines and trucks. But also sometimes with cars as well. I own a small workshop in the south of Sweden. Currently we are 5 mechanics, including me. I really want the Pico to help me in troubleshooting and cutting the...

moved camshaft one tooth… timing error gone.

hello,
'I have a lorry in workshop. The dtc says timing error. think the graph is ok. your opionion? picture is from volvo instruction

Thank you very much for a good and informative answer. This lorry has a fleetmanagement system installed, and there is a problem reporting values from the vehicle, like PTO-time, idling etc. I was hoping to have found disturbance in the can-bus explaining the lack of information. I tried to decode t...

Hi all!

I want your input on this capture. It's my first try with Picoscope, just ran with standard Can-bus settings from the menu.
My concern is the distortion of the signal. Is it enough to disturb transmission of data?

I will try to get a recording when I have oppurtunity