Search found 15 matches

by PicoChris
Mon Jan 11, 2016 1:56 pm
Forum: Automotive kit hardware
Topic: WPS500 Pressure Adaptors for Sealey Fuel Testers
Replies: 4
Views: 2855

Re: WPS500 Pressure Adaptors for Sealey Fuel Testers

The connectors we use have a valve in the female coupler only, the male on the WPS500X relies on the valve in the body of the WPS500X.
by PicoChris
Mon Jan 11, 2016 11:58 am
Forum: Automotive kit hardware
Topic: WPS500 Pressure Adaptors for Sealey Fuel Testers
Replies: 4
Views: 2855

Re: WPS500 Pressure Adaptors for Sealey Fuel Testers

Hello I am sorry to say I am not certain of which coupler the Sealy kits use so I cannot be 100% confident as to which of our standard adaptor sets would work with you kit. What I can say is that the 3 standard connectors we are supporting do seem to cover the majority of kit out there. The 3 quick ...
by PicoChris
Mon Jan 04, 2016 8:53 am
Forum: Automotive kit hardware
Topic: WPS 600 Dry Quick Release Connectors
Replies: 2
Views: 1994

Re: WPS 600 Dry Quick Release Connectors

Richard The WPS600 is not specifically rated for use with high pressure gas systems as it has been specifically designed with Hydraulic operation in mind. for this reason we have never done any testing with compressed gas and so have little experience on suitable connectors. I also have to point out...
by PicoChris
Thu Sep 03, 2015 8:19 am
Forum: Diagnostic discussion
Topic: Sample waveform for Vauxhall Insignia Active ABS Current?
Replies: 11
Views: 4032

Re: Sample waveform for Vauxhall Insignia Active ABS Current

If you are unable to uncover enough wire to get a number of turns round the current clamp then you can still get a reading using the low pass filter and some channel gain. The attached waveforms shows the output of the TA018 and TA234 current clamps measuring the current through a 1K resistor with a...
by PicoChris
Fri Apr 24, 2015 8:16 am
Forum: Automotive kit hardware
Topic: WPS 500 charging
Replies: 1
Views: 2196

Re: WPS 500 charging

Hi there the charging circuit in the WPS500 is safe to be left on over night but to get the best out of the battery I would not keep it on charge continually. The battery should take around 4 hours to charge fully from flat but for the best result I would recomend discharging the battery before rech...