Search found 319 matches

by Fat Freddy
Tue Jun 25, 2013 1:09 am
Forum: Case studies
Topic: Lean misfire – Have you checked the coils?
Replies: 8
Views: 14345

Re: Lean misfire – Have you checked the coils?

Technically it wasn’t a lean misfire but a complete shutdown. But the symptoms did a very good job of imitating it. Hence the new MAF and injector clean. The big dumps of fuel it got when injection started again probably helped to give the lean sounding back fire. My thoughts are the coil was sendin...
by Fat Freddy
Mon Jun 24, 2013 4:15 am
Forum: Case studies
Topic: Lean misfire – Have you checked the coils?
Replies: 8
Views: 14345

Lean misfire – Have you checked the coils?

I was presented with this 1991 6cyl E36 325i BMW which had an ongoing problem for the last two years and it seemed unrepairable. The complaint was lack of power, hesitation and the occasional cutting out on acceleration once warm. First up was the test drive to confirm the fault. Sure enough, once w...
by Fat Freddy
Sat Jun 22, 2013 10:39 am
Forum: Diagnostic discussion
Topic: Tests for a Honda CB500 Four 1975
Replies: 4
Views: 3865

Re: Tests for a Honda CB500 Four 1975

Robski wrote:issue ??

Your first post isn't exactly clear is it ??
You work on that and I'll work on the second.

Davide you are not explaining things very well.


FF
by Fat Freddy
Mon Jun 17, 2013 11:29 am
Forum: Diagnostic discussion
Topic: OCV Capture wanted.
Replies: 1
Views: 1940

OCV Capture wanted.

Hi all. I'm after a waveform for an oil control valve for Toyota VVT The engine is a 3ZR - FBE (be a bonus if some one has that). But I would imagine any 3ZR may do. Or a 2ZR. Even any random late model Toyota VVT OCV. I'm only interested to have a look at the frequency's, not for repair or diagnosi...
by Fat Freddy
Mon Jun 17, 2013 1:40 am
Forum: PicoScope 6 Automotive software
Topic: MAF Signal
Replies: 19
Views: 12496

Re: MAF Signal

I think this is what Alan was referring to.
Yes, I thought the same.

I was just hoping we would see a better capture first.
My thoughts was the sample rate was too low. Therefore applying the maths there may give an incorrect result. - It's not the Pico way.


FF
by Fat Freddy
Sat Jun 15, 2013 12:47 pm
Forum: PicoScope 6 Automotive software
Topic: MAF Signal
Replies: 19
Views: 12496

Re: MAF Signal

Your sample rate is way too low. X4 at least - avoid aliasing. You want a nice digital signal.

HTH
FF
by Fat Freddy
Sat Jun 15, 2013 4:39 am
Forum: Best of the web
Topic: Webinairs
Replies: 1
Views: 7048

Webinairs

Mainly MoTeC based but some may find some of the vids usefull/interesting - CAN, PID parameters ect.

http://www.motec.com/webinars/webinararchive/

FF
by Fat Freddy
Wed Jun 12, 2013 1:37 am
Forum: Diagnostic discussion
Topic: 2008 Vauxhall Vivaro piezo injector currents
Replies: 17
Views: 14613

Re: 2008 Vauxhall Vivaro piezo injector currents

ie using bigger words
:lol: :lol: :lol:

Did someone mention "umberella"?
by Fat Freddy
Wed Jun 12, 2013 1:26 am
Forum: Introductions
Topic: Hello from New Zealand
Replies: 12
Views: 7575

Re: Hello from New Zealand

i have done AED, SCAN1 and EMS1-1. Looking forward to doing the scope one and rest of EMS and like to do the diesel ones too? Have you done some with him? Yes. Done all his scope coarse's, apart from the latest (this year), but I started about seven years ago. Herbert has always been helpfull. They...
by Fat Freddy
Tue Jun 11, 2013 6:31 am
Forum: Introductions
Topic: Hello from New Zealand
Replies: 12
Views: 7575

Re: Hello from New Zealand

Hi Brett.
Did some great training with a dutch guy here in south island who makes up scope packages and has good support (i think and hope about support) as options here are pretty limited.
That will be Herbert.

What coarses have you done?


FF