Thank you for the reply Steve.

I do confirm the problem does exist on mouse operation as well as on touch screen.

I can not zoom into the signal graphs of the cylinder balance test. The zoom function does work in other tests, for example the compression check. Is this me doing something wrong or is it a bug?

Thank you for the explanation.

Thank you Roman for this case study.

Because you're talking about paint removal: Was this problem self-inflicted after some kind of bodywork?

The 60 amp probe will survive this....Actually its reading will max out around 200 amps and these readings are pretty accurate and in line with the measurements of a high current clamp. If you wanted to avoid the signal from the 60A clamp being clipped off than you may want to ac-couple it.

Thank you for the response. To call the applicability with your words challenging may be considered a not minor understatement, :D . On A/F sensors it might be more than that. I was aware of Frank's video and will go over it again, it seems more practical to me to go for the voltage measurement. Gre...

The 60 amps BNC+ clamp (TA 473) is described as suitable for current measurements on broadband a/f sensors, in conjunction with a current multiplier.

What exactly would this current multiplier be? Some kind of looping the current carrying wire? Is there a specific Pico product?

Thank you Steve. I'll give it a go and feed back.

Would you recommend a Windows 11 OS for Pico7 at this moment? If not, how long do you expect will it take until it is "recommendable"?

Thank you.

Thank you Steve for the explanation!