Hello Patrick,

I have this additional software which your can overlay a graph over the waveform and see stroke positions.

I got it from here-
https://driveabilityguys.com/software-and-tools

hopefully it helps

Gaz

hello all I've been trying to view live data from a twin cylinder motorcycle with my 4423 and 2 secondary ignition pickups (capacitive) on 2 channels. I'm only able to see 1 waveform at any one time and have to switch off a channel to view the other. I've tried different channels and no matter the c...

Just an update and thank you- I contacted the support team via the email supplied by Martyn and got my current clamp sent in and repaired. It was a nice timely turn around. I tried out the clamp and it would seem that the clamp was faulty for longer than I thought! It produces very good and clear wa...

Hello all,

It seems that my current clamp no longer works as it should, can it be repaired? and at what cost?

many thanks

Hello Steve,

Thanks for answering my question. Its a feature which I do greatly like and use on my printouts when/if customers want them.

I shall wait patiently for another update.

Thank you and the team for all the hard work you put in

Gaz

Hello guys,

I may have missed it but does pico auto 7 software have the option to add the garage/operator details when you go to print out the waveform?
I know pico auto 6 had it and for adding a company logo.

Thanks in advance
Gaz

Just an observation on the scope capture, the voltage is a little above 10volts. I understand the k line communication is binary and switches between battery voltage and ground. Would a slightly discharged battery affect communications? I understand that you have communications to other ecms on the ...

Hello, I'm on a tablet too. Its a Ruggon rexstorm px501, Windows 10 version 1903, 8gb ram, Intel i5-5350cpu 1.8ghz. Same issue as MachOne.id be happy to help out with testing software updates etc. So far I'm running in demo mode as funds don't quite allow the hardware purchase just yet. Thank you Gaz