Search found 15 matches

by Littlejohn
Sun Dec 17, 2023 8:24 am
Forum: PicoScope 7 Automotive software
Topic: Cylinder Timing Overlay
Replies: 5
Views: 5361

Re: Cylinder Timing Overlay

Then you can buy the overlay from here if you can’t use the Microsoft software https://driveabilityguys.com/software-and-tools
by Littlejohn
Mon Dec 11, 2023 11:15 pm
Forum: Diagnostic discussion
Topic: Fiat Doblo 1.6 Diesel worn camshaft
Replies: 3
Views: 2392

Re: Fiat Doblo 1.6 Diesel worn camshaft

it’s a great capture.
Looking at it I am surprised you had good compression as it looks like there is no intake pull at all.
Do you have a wps to go in-cylinder?
by Littlejohn
Fri Sep 01, 2023 9:39 pm
Forum: PicoScope 7 Automotive software
Topic: PICO HINTS and TIPS.
Replies: 4
Views: 14036

Re: PICO HINTS and TIPS.

Cool how do you do that?
by Littlejohn
Mon Aug 28, 2023 7:24 am
Forum: PicoScope 7 Automotive software
Topic: PICO HINTS and TIPS.
Replies: 4
Views: 14036

PICO HINTS and TIPS.

I wanted to start a post on pico hints and tips to see what other people are doing. So I'll start with this one on saving and sharing known good captures, I have now starting setting up the scope as below with the reference signals already loaded before saving and sharing my known good. This way whe...
by Littlejohn
Fri Aug 04, 2023 7:32 pm
Forum: Diagnostic discussion
Topic: basic questions
Replies: 12
Views: 6477

Re: basic questions

Hello. You are correct there will be no drop in the quality of the signal if connecting in the wiring as the signal needs to be good at the ecu. The down side is to seal the wires to prevent water intrusion afterwards. Making your own plugs is a good idea if you are testing the same type of sensors ...
by Littlejohn
Mon Jul 10, 2023 9:30 pm
Forum: PicoDiagnostics software
Topic: Volunteers required
Replies: 5
Views: 9357

Re: Volunteers required

Is there a date you have in mind? As long as I can have two weeks notice I can be there.
by Littlejohn
Sun May 21, 2023 11:47 am
Forum: Electric Vehicle
Topic: EV kit vs Master Kit
Replies: 3
Views: 10336

Re: EV kit vs Master Kit

Hello
I have just received the TA041 probe and I would like to power it via USB but I can't see on the website and USB power leads? What does everyone use?
by Littlejohn
Wed Jun 02, 2021 10:32 pm
Forum: Electric Vehicle
Topic: High voltage cable testing
Replies: 5
Views: 10443

Re: High voltage cable testing

Thank you all, no history to the vehicle and both batteries charge up ok. DTC is active all the time and the vehicle doesn’t start. I have something to work with now, hope to get to the bottom of it soon.
by Littlejohn
Mon May 31, 2021 8:10 am
Forum: Electric Vehicle
Topic: High voltage cable testing
Replies: 5
Views: 10443

High voltage cable testing

Hi all. I have a Jeep renegade hybrid with a P1D72 DTC, high voltage cable open circuit. Flow chart for this is check the cables are connected and if no fault found fire the parts cannon at it. Scan too doesn’t tell you what cable it thinks is open. Can’t believe I am going to have to throw parts at...
by Littlejohn
Sun Feb 21, 2021 3:34 pm
Forum: Diagnostic discussion
Topic: CAN BUS Troubles - Jeep JK fitted with Hemi engine
Replies: 35
Views: 33088

Re: CAN BUS Troubles - Jeep JK fitted with Hemi engine

I am in Surrey so not too much of a distance