Search found 7 matches

by HillVS
Mon Jun 21, 2021 5:50 pm
Forum: Help me fix my car
Topic: Mondeo cranking but not starting.
Replies: 4
Views: 11455

Re: Mondeo cranking but not starting.

We’re in Newport if you have access to recovery or a tow? Pm me if needed.
by HillVS
Mon Jun 21, 2021 5:45 pm
Forum: Help me fix my car
Topic: 2016 Audi A6 P0087
Replies: 2
Views: 6836

Re: 2016 Audi A6 P0087 FIXED

Hi sorry I didn’t see your reply, I did check the DVR for swarf and as it was a new pump fitted by Audi but all was clean, I carried out the frank massy dvr test and that was an experience I can say! The volts shot to 4.5v then dropped almost immediately, so proved I had a major hp system leak. I di...
by HillVS
Fri Apr 02, 2021 12:23 pm
Forum: Help me fix my car
Topic: 2016 Audi A6 P0087
Replies: 2
Views: 6836

2016 Audi A6 P0087

Hi, I have a Audi A6 CHNA engine code. It’s been with another garage and had the fuel filter and rail pressure sensor done. The car flags the code when you ask for more throttle. Rail pressure is whilst driving is consistently 200bar under desired. Idle it’s spot on. Supply to the pressure sensor is...
by HillVS
Fri Sep 04, 2020 5:35 pm
Forum: Automotive kit hardware
Topic: Adc212 resurected
Replies: 2
Views: 5641

Re: Adc212 resurected

Hi, I too have a adc212 and I have it running on PicoScope automotive 6 beta version but you have to have it on a Windows 7 or 10 32 bit not 64 bit. I have the beta sent over from the technical guys at Pico. I now have access to the waveform library. Would love to upgrade but the current climate it’...
by HillVS
Wed Sep 18, 2019 8:57 pm
Forum: Help me fix my car
Topic: Audi A4 BPW non start
Replies: 1
Views: 2970

Re: Audi A4 BPW non start

Just a update, I found a known good cam and crank comparisons and showed the timing was out. Pegged it all up and it was right so removed the cam pully and the cam had slipped from the keyway. 3 teeth out.
by HillVS
Tue Sep 17, 2019 12:50 pm
Forum: Help me fix my car
Topic: Audi A4 BPW non start
Replies: 1
Views: 2970

Audi A4 BPW non start

Hi all, we have a audi a4 BPW 2007 engine, the customer has rebuilt the engine and it wont start. If i unplug the cam sensor it starts but wont rev, i'm convinced its a timing fault but checking the timing marks they all look good. I need a cam crank comparison for this engine if possible please as ...
by HillVS
Wed Apr 03, 2019 8:49 pm
Forum: Help me fix my car
Topic: NISSAN juke C1130 fault code
Replies: 12
Views: 46549

Re: NISSAN juke C1130 fault code

Hi, just thought I comment as I get so much info from sites like this and want to help. Iv has many of these problems on the Nissan jukes and that code is related to a engine fault weird I know. What I found is that it is always the pipe or the banjo bolt blocked going to a pressure sensor. It’s the...