Search found 66 matches

by kona
Sun Aug 08, 2021 7:40 pm
Forum: Help me fix my car
Topic: Peugeot 3008 1.6 HDI revs to limit
Replies: 4
Views: 8082

Re: Peugeot 3008 1.6 HDI revs to limit

...... It is 100% not running on its oil. ..... I have been asked to look at it BUT they have asked me not to run it because they dont want to blow it to bits. ...... 1. What way did it prove 100%? Describe detail. 2. Unscrew the glow plugs and and turn on the starter and safe can analyze live data...
by kona
Wed Jul 21, 2021 12:04 pm
Forum: PicoScope 7 Automotive software
Topic: PicoScope 7 Automotive Software
Replies: 139
Views: 192670

Re: PicoScope 7 Automotive Software

...... I have another question, in which direction shall I start troubleshooting why Win 7 x64 search for updates ends with an error, while on Win 10 works flawlessly? https://www.winpcware.com/en/extension/xml/windowsupdatediagnostic-xml#Download_WindowsUpdateDiagnostic.xml Compatible with: Window...
by kona
Sun Jun 27, 2021 8:11 pm
Forum: Diagnostic discussion
Topic: exhaust backpressure at high rpm
Replies: 3
Views: 4442

Re: exhaust backpressure at high rpm

senprv wrote:
Fri Jun 25, 2021 6:06 pm
-------- rpm is 5400 on this capture. ------------------------------
This is a typical view for 5400 rpm and is not used for analysis. :cry:
Do this test at idle or starter rpm.

Attach a file.

P.S.Look at the website of the manufacturer of your device. You will find many examples.
by kona
Sun Apr 18, 2021 1:18 pm
Forum: Diagnostic discussion
Topic: Fiat Doblo non-starter
Replies: 6
Views: 6263

Re: Fiat Doblo non-starter

MartinA wrote:
Fri Apr 16, 2021 5:43 pm
.... and will capture everything again with disabled fuel pump. what is triggering fuel injector signal location?
The first thing you need to do is check the belt ! :!:
It is clear from the diagram. what a misalignment of 5 teeth ! :roll:
Leave the pump alone.
by kona
Thu Apr 01, 2021 4:59 pm
Forum: Diagnostic discussion
Topic: misfire opel corsa 1,2 help
Replies: 6
Views: 6565

Re: misfire opel corsa 1,2 help

Hi,
The problem is a mechanical failure.
Cyl. 3 EXHAUST VALVE :cry:
by kona
Tue Feb 23, 2021 9:30 am
Forum: Diagnostic discussion
Topic: CAN BUS Troubles - Jeep JK fitted with Hemi engine
Replies: 35
Views: 33088

Re: CAN BUS Troubles - Jeep JK fitted with Hemi engine

French Chris wrote:
Tue Feb 23, 2021 8:54 am
--------------
Where am I supposed to take the Picoscope readings ?
----------------------like this :
by kona
Tue Feb 23, 2021 8:37 am
Forum: Diagnostic discussion
Topic: CAN BUS Troubles - Jeep JK fitted with Hemi engine
Replies: 35
Views: 33088

Re: CAN BUS Troubles - Jeep JK fitted with Hemi engine

Hello. You will not RECEIVE any signal from the diagnostic connector by connecting the oscilloscope. :shock: To receive a signal, you need to send a REQUEST. But the oscillograph cannot send any requests. Try to connect the scanner and the oscolograph to the diagnostic socket at the SAME time. And s...
by kona
Thu Feb 11, 2021 6:52 pm
Forum: Forum feedback
Topic: Adding pictures to Attachments
Replies: 8
Views: 13977

Re: Adding pictures to Attachments

Steve Smith wrote:
Thu Feb 11, 2021 2:59 pm

............. and we will resolve this for you
Hello,

Thank you for your desire to help me in this matter.
Oh, it seemed to me that the problem was common...., and not just me ... :?:
I'll try to figure out my computer again.

It was nice !