Hallo

I need help, does anyone have know good cam/crank waveform for Audi A6 2015 3.0 diesel engine code: CRTD

Thanks in advanced

Hello society I have a VW Amarok 2018 with a 3.0 V6 TDI engine (DDXB) that has an unstable idle and as far as I can see misfires on the cylinder nr.2. There are no errors in the engine computer. I am confused by the fact that the pressure in the second cylinder varies, i.e. 80% is weak but 20% is re...

Hi folks, please help with this waveform. Car is BMW E91 with N43B16 engine and MSD 81.2 ecu. Problem is missfire but missfire without fail code and with very little counter on OBD missfire on all cilinders. Coil, spark plugs and injectors are brend new, mechanical part of the engine (cilindar press...

Hei

Yes that is battery charger, maybe he makes noise ...Tomorrow I'll record something without him and we will see, good idea.
And the other thing is pwm signal generator ... I used to checking fuel pressure regulator and fuel metering valve.

Hei,

the ring for runs cr pump rotates around the camshaft ... I welded at three points in the middle (to fasten the ring to cam) and got the pressure and started the engine, nice. I told the customer that needs to be replaced camshaft.


Cheers

Hallo, finally .... I must say that the car came from another service where they replaced a CR pump... Photos and video explaining all. Video is too large for this forum that is why I uploaded on youtube. Thank you all for your help. IMG_20170208_083838761.jpg IMG_20170208_083848210.jpg https://yout...

Hallo, a lot of comments and a lot of advice, thank you for everything so far. Today I find and recorded correct signals from another car : Fuel metering .psdata Fuel metering.psdata Fuel pressure control.psdata Fuel pressure control.psdata ckp-cam sensor.psdata Known good cam -crank.psdata Fuel pre...

Hallo, Thank you very much for your answers. I know that the picture is clearer when filter's turn on but I think there is some problem and because of him are so many noises, perhaps I'm wrong. I still fighting with the car ... Today I made a couple of shots ...crankshaft and camshaft signals are so...

Hallo to all, I need your help ... Problem is 2.0 Volvo V50 2009 (D4204T) engine will not start, which has an error P0087 - pressure too low. Signal from rail sensor has a lot of noise ... pump control (pwm) is ok... CR pump is new. The amount of fuel to the pump is ok. I measured fuel amount of the...