Search found 79 matches

by Lee
Tue Nov 12, 2013 1:17 pm
Forum: PicoScope 6 Automotive software
Topic: Scope turning off and software hang ups
Replies: 17
Views: 23515

Re: Scope turning off and software hang ups

Hi Andy I get this myself especially with the software locking up and returning after unplugging the scope. I found it only happens after a software upgrade but in my experience I've found deleting the Scope Driver from Device Manager and re-installing the driver helps to rectify this. Might be wort...
by Lee
Wed May 01, 2013 8:21 pm
Forum: PicoScope 6 Automotive software
Topic: 6.7.19.2
Replies: 14
Views: 19355

Re: 6.7.19.2

Sounds like the drivers possibly corrupted, best thing to do is delete the driver and re install it, simple process. If you right click on 'My Computer' or 'Computer' depending upon your version of windows, then click on 'Manage' This takes you to the Computer Management Control. On the left hand si...
by Lee
Wed May 01, 2013 7:04 pm
Forum: PicoScope 6 Automotive software
Topic: 6.7.19.2
Replies: 14
Views: 19355

Re: 6.7.19.2

Hi Robski

did you install with scope connected? you may have corrupted the driver.

Kind Regards

Lee - LMH Engineering Services :D
by Lee
Wed May 01, 2013 12:29 pm
Forum: PicoDiagnostics software
Topic: messed up relative compression wave form, what is wrong?
Replies: 17
Views: 26101

Re: messed up relative compression wave form, what is wrong?

Is your laptop plugged into mains, could be noise through charging system within laptop.

Have you tried with laptop not plugged into mains?

Kind Regards

Lee - LMH Engineering Services :D
by Lee
Wed Mar 20, 2013 2:09 pm
Forum: Forum feedback
Topic: Hidden Status
Replies: 1
Views: 8245

Hidden Status

The Hidden Option has been removed from my profile settings, when logging in as hidden option still on log on menu, it still shows me?

Is this a bug or has this feature been removed?
by Lee
Tue Mar 19, 2013 8:44 pm
Forum: PicoScope 6 Automotive software
Topic: PicoScope 2104
Replies: 9
Views: 19541

Re: PicoScope 2104

Well sometimes you just need to know what can be done so safe advice is as good as any and as you seemed persistant you were gonna use it, best know whats safe otherwise its a lot of money to waste so best keep within the tolerances of the scope. As i said on earlier post, if you cant budget a full ...
by Lee
Tue Mar 19, 2013 8:25 am
Forum: Diagnostic discussion
Topic: K12 Nissan Micra P0132
Replies: 4
Views: 15246

Re: K12 Nissan Micra P0132

Hi Tom Just a few things ive known and come accross, may help :) ........... may not :( .......... There were issues with these, normally replacing the Lambda Sensor corrected this. Some of these had what was called an A/R ratio sensor which is in fact a Wideband Lambda Sensor on these. How many wir...
by Lee
Mon Mar 18, 2013 5:26 pm
Forum: PicoScope 6 Automotive software
Topic: PicoScope 2104
Replies: 9
Views: 19541

Re: PicoScope 2104

I understand what you mean, we all like to play with new toys :lol: The only advice i could give you in conjunction in using the 2104 on Automotive Applications, not T&M Applications as this isnt really our field, is to keep to circuits under 20 Volts as this is the limit of the Scope. Definatley Ig...
by Lee
Mon Mar 18, 2013 1:16 pm
Forum: PicoScope 6 Automotive software
Topic: PicoScope 2104
Replies: 9
Views: 19541

Re: PicoScope 2104

Hi The PicoScope 2104 is a Test and Measurement scope for use really with low level circuits. It will only function in the Standard NON Automotive Software. For Automotive use with this scope you risk not only damage and breakage to the 2104 Scope but possibly to yourself as its not designed with th...
by Lee
Mon Mar 11, 2013 4:00 pm
Forum: Diagnostic discussion
Topic: Parasitic draw test
Replies: 6
Views: 11745

Re: Parasitic draw test

Hi Neil

Have you tried turning the Clamp around, i.e. remove it from the wire, flip it over and place it on the wire again.

it will show positive one way and negative the other.

Kind Regards

Lee :D