Hi Lexion, There are a number of variables that will affect voltage output for a smart alternator. If we look up the data sheet from NXP which can be found on the following article - https://www.picoauto.com/library/training/lin-bus-decoder-and-lin-controlled-alternators, we have a binary figure for...

Hi Enda, Sorry to hear you are having problems with your TA388. It's certainly not a common issue considering how many there are out in the wild but we should take a closer look. Can you send an email to support@picotech.com or fill in the support form here - https://www.picoauto.com/tech-support an...

Hey Josh, Welcome to the forum. There is a lot of information on this site so please take a look at the useful links section to find a subject of interest! https://www.picoauto.com/support/topic15231.html Do also check out the training page on the website here - https://www.picoauto.com/library/trai...

Hello and welcome to the forum! They're is so much to learn but rest assured you are not alone. Great to see you move to the 4425A. I appreciate that this is a financial investment but promise you you won't look back. Also, welcome to the wonderful world of off-highway and the green and yellow machi...

Hi carputerke, Interesting question as typically we don't see those signals as those wires are not easily accessible. Is there anything in particular you are looking or is it just out of curiosity? As Martyn has mentioned if you have any waveforms to share then please feel free to do so. Alternative...

Hi flaurits, I agree with Roman here. Given you power and ground to the sensor appear to be good apart from some slight interference, the main issue is on channel A where the signal is being really corrupted. If the ECU is looking for the output either duty or frequency, it has no way of calculating...

Hi, Welcome to the forum and the Pico community! The one thing that I enjoy about this industry is the fact that there is always something new to learn. To help you get started with the Pico journey we have a compiled a list of useful links on topics we've found useful over the years. https://www.pi...

Hi Conrad, Great to have you with us and I'm sure there will be plenty of discussions to be had. To help you get started we have a useful links section where we try to keep all the useful links in one place. https://www.picoauto.com/support/topic15231.html There may be a discussion or two to help yo...

Hi Terrymc, Thank you for your feedback. PD is still very much a windows application sadly. Appreciate that there are a growing number of MAC and Linux PicoScope users so having the full PicoScope Automotive software available is important, in particular the growing need for NVH test equipment. I've...

Hi Bruno, Unfortunately, it is not possible to trigger on decoded messages. This is down to the way we currently decode which happens only once the buffer is full or if the capture is stopped. I would suggest an option would be to remove the decoder and just have channels A and B for CAN H and CAN L...