Hi STC ya easystart fed through pipe at intake manifold just after the inter-cooler, I will graph what you suggest and upload tomorrow.

Hi all, Back at the E46 and I carried out a compression test, Cyl 1= 15 bar, no2 = 22 bar, no3 = 23 bar, no 4 = 26 bar def no problem with 3 cylinders. After a struggle today I got it to run on easystart, With injectors connected or disconnected It runs while easystart is being sprayed into it when ...

Hi STC
I don not have a pressure transducer but will do a compression test with a gauge, Im busy with other work and i will post the results on here with i get them done. Thank you STC for all the time and advice you have given this subject. Thanks also to Steevegt for your contribution.
Regards Rex

This is the same with no2

No it wont run on easy start, I just did cam, crank with all the individual injector and relative compression. Number 4 does not look good at all. will attach on here

Hi STC, thank you for your help. I appreciate all you have put into your reply. Im away from the vehicle for a few days. I have fuel pressure, Injectors are firing electronically and mechanically but making no effort at all to start. There are no waveforms for this vehicle 'cam crank' etc when you l...

Hi all, I have a non start 2003 BMW E46 320d, M47 D204D4 vin FY56507. Would be gratefull if some one would check the timing on the attached file Cam and crank.

Hi all

Hi Rustyboy did you ever solve this problem with the Polo. I have 1.2 Fabia that is the very same. I have tried everything you have said above.