Regarding in-built receiver yes it would be more involved, I was just making the point that this could also be done. Checking the data at the receiver will tell you if the remote is sending correct Identifier and receiver is working as should (part of many manufacturer test plans). As already mentio...

When I have had faults like this an option is to go to the RF receiver, from there you can capture the signal in serial form . A little while back I had a transit mk7 with rcl not working, customer had only purchased this key a little more than a month prior hence me going this route. The key when t...

The quickest and best way is to just hook up scope to check PWM signal while cranking, from that you will see if it is pulling to ground and confirm what duty it is at ect. What is your MAF/MAP/temp reading while cranking?

I came across this a few months back, solution on that one was to update ECU software. Though I was informed from another garage that an EGR fault set this code on one that they had done. As each year passes I am updating more and more modules to rectify faults. Last week Peugeot ECU update to resol...

uploaded on day of my original post mate

Thanks for that much appreciated, timing out 1 tooth.

Hi can anyone help and post a known good cam/crank for:

Ford Transit mk7 MY2012
Engine code CYRB/CYRA

many thanks