Search found 5 matches

by Technoman64
Sat Jan 12, 2008 3:36 am
Forum: PicoScope 6 Automotive software
Topic: Version 6.0 locks up
Replies: 4
Views: 12216

Version 6.0 locks up

When using the latest version and the USB cable comes unplugged the program locks and if I save the current setup then it is corrupted. If I restat and try to load the setup that was saved the program has a fatal error and exits.
by Technoman64
Mon Nov 19, 2007 8:11 pm
Forum: Automotive kit hardware
Topic: Unusual, Intermittent Pico Quad Module Problem
Replies: 7
Views: 15126

Just wanted to let you know I have not encountered any more problems. I did find out that the vehicle I was testing had the ignition coils relocated and the sparkplug wires were running in the same harness as the low voltage signal wires. This ended up being the source of problems that were occuring.
by Technoman64
Thu Oct 18, 2007 7:43 pm
Forum: Automotive kit hardware
Topic: Unusual, Intermittent Pico Quad Module Problem
Replies: 7
Views: 15126

When running my Laptop on internal battery while testing ignition on a 2007 Z06 Corvette I had strange behavior from 4-channel automotive scope. When connected to wall power supply all seems to be good. I did not try using an invertor running from vehicle +12V to power Laptop. Curious to know if you...
by Technoman64
Thu Oct 11, 2007 7:07 pm
Forum: Automotive kit hardware
Topic: Streaming Data mode to record to Hard Disk
Replies: 3
Views: 10547

I started with Version 6 and then also loaded Version 5. I have found that Version 6 does indeed work much better and was able to save data to review after turning vehicle off. Are there any Sample Driver code for Visual C++ and/or Visual Basic for the 4-Channel Automotive Scope? Or does Version 6 a...
by Technoman64
Thu Oct 11, 2007 4:11 am
Forum: Automotive kit hardware
Topic: Streaming Data mode to record to Hard Disk
Replies: 3
Views: 10547

Streaming Data mode to record to Hard Disk

I have just recently purchased one of the 4-channel automotive kits. Before I purchased I read the online manual it it stated I could use Automotive Scope in Streaming Data mode and record data to hard disk. How do I do this? I do not see any method of performing this action in the software. I need ...