Search found 314 matches

by victor2k
Fri Jul 09, 2021 4:02 am
Forum: Diagnostic discussion
Topic: iveco daily 3.0 2019 non comunnication edc
Replies: 11
Views: 803

Re: iveco daily 3.0 2019 non comunnication edc

Hello, Immo can't block the ECU communication,try to connect at A24/A25 your CAN decoder only(without AT,ABS,BC,...) to see some CAN activity,also please check if on A28 the main relay is turned on by ECU when ignition is ON.What tool was used for diagnose?Try to diagnose only your ECU on A24/A25,wi...
by victor2k
Mon Jul 05, 2021 12:58 pm
Forum: Diagnostic discussion
Topic: iveco daily 3.0 2019 non comunnication edc
Replies: 11
Views: 803

Re: iveco daily 3.0 2019 non comunnication edc

Hello,
With the battery disconnected what value of resistence you can measure in DLC between 6 and 14?With EDC17 in network and unplugged?If the value will change from 60 to 120 ohm then your ECU is faulty or without supply.Do you know the location of 61126 resistor?
Best regards
by victor2k
Fri Mar 26, 2021 7:42 am
Forum: Help me fix my car
Topic: Mercedes C270 S203 612.962
Replies: 4
Views: 2027

Re: Mercedes C270 S203 612.962

victor2k wrote:
Thu Mar 25, 2021 5:02 pm
Hello,
I have only 612.963 or 612.695 if you need it
Best regards
by victor2k
Thu Mar 25, 2021 5:02 pm
Forum: Help me fix my car
Topic: Mercedes C270 S203 612.962
Replies: 4
Views: 2027

Re: Mercedes C270 S203 612.962

Hello,
I have only 612.963 if you need
Best regards
by victor2k
Mon Feb 22, 2021 3:14 pm
Forum: Diagnostic discussion
Topic: Opel Corsa D Z12XEP no start
Replies: 5
Views: 1756

Re: Opel Corsa D Z12XEP no start

Hello,
I think is not the "crossing point" issue is more about how the ECU read the engine speed,please look at the attached file.Using the attached info you will find how the extra dip from the area with missing teeths is readed by ECU as a normal teeth.
Best regards
by victor2k
Sat Dec 26, 2020 10:48 pm
Forum: Diagnostic discussion
Topic: Toyota Previa diesel 2002 lack of power valve timing?
Replies: 16
Views: 3505

Re: Toyota Previa diesel 2002 lack of power valve timing?

Ok,here you will find what you need
by victor2k
Sat Dec 26, 2020 9:28 pm
Forum: Diagnostic discussion
Topic: Toyota Previa diesel 2002 lack of power valve timing?
Replies: 16
Views: 3505

Re: Toyota Previa diesel 2002 lack of power valve timing?

RYM6746 wrote:
Sat Dec 26, 2020 8:48 pm
How on earth does an exhaust valve open 18 degrees after the intake valve? That makes no sense? How have you worked out when the EVO is in regard to crankshaft degrees? I still can't see any IVO or EVO in the last upload? Are we missing something here?
Sorry,we were fighting for something?
by victor2k
Sat Dec 26, 2020 8:22 pm
Forum: Diagnostic discussion
Topic: Toyota Previa diesel 2002 lack of power valve timing?
Replies: 16
Views: 3505

Re: Toyota Previa diesel 2002 lack of power valve timing?

Hello, According to the attached file your intake valve must be opened for 213 crankshaft degrees(on your engine 215-220) and exhaust valve must be opened for 231 crankshaft degrees(on your engine only 210),so the exhaust valve close too early/open too late. Maybe you must check the valve clearance ...
by victor2k
Sat Dec 26, 2020 3:32 pm
Forum: Diagnostic discussion
Topic: Toyota Previa diesel 2002 lack of power valve timing?
Replies: 16
Views: 3505

Re: Toyota Previa diesel 2002 lack of power valve timing?

RYM6746 wrote:
Sat Dec 26, 2020 3:21 pm
Where do you find such information.
In repair manual/NCF(new car features)/engine/valve mechanism
by victor2k
Sat Dec 26, 2020 2:37 pm
Forum: Diagnostic discussion
Topic: Toyota Previa diesel 2002 lack of power valve timing?
Replies: 16
Views: 3505

Re: Toyota Previa diesel 2002 lack of power valve timing?

Hello,
Here you will find the requested data about opening/closing valve timing
Best regards