Search found 69 matches

by terbo
Thu May 02, 2019 10:44 pm
Forum: Diagnostic discussion
Topic: BMW 2008 E87 118i Ignition
Replies: 1
Views: 3310

BMW 2008 E87 118i Ignition

Hi, Just a quick Capture of the Ignition Coil of Cyl. 3 of this BMW. The Car is repeating setting a P0303. Is this a Problem with the Coil/Plug (already new) or with the Fueling (Injector) ? New doesn´t mean good, i know.But 3 Shops already thought it was Coil/Plug. BMW would like to replace the Eng...
by terbo
Wed Oct 03, 2018 9:25 pm
Forum: Help me fix my car
Topic: Citroen C3 2007 loosing Power Steering
Replies: 2
Views: 6307

Re: Citroen C3 2007 loosing Power Steering

Thank you for the Tips. We had a look at the Car again, and found two Suspect Terminal Pins, we cut them off, replaced them with new ones, plugged all together and now its on for testing. Because we could not get it happening again. I am not 100 % sure, that those two Terminals are all it needed, bu...
by terbo
Thu Sep 27, 2018 8:15 pm
Forum: Help me fix my car
Topic: Citroen C3 2007 loosing Power Steering
Replies: 2
Views: 6307

Citroen C3 2007 loosing Power Steering

Hi, The Car of a friend looses its Power Steering from time to time. Some times after Cold Start, some times after driving. When you restart a few times or let it idle, it works again. When the Power Steering does not work, you can not communicate via Diagnostics with the EPS-ECU. So he was told at ...
by terbo
Sat May 19, 2018 6:35 pm
Forum: Diagnostic discussion
Topic: VW 3,2 L V6 CAM/CRK vs OBD-Tool
Replies: 7
Views: 9284

Re: VW 3,2 L V6 CAM/CRK vs OBD-Tool

The Sensor Wires can´t be reversed, because of wiring length and position. The two solenoid-connectors COULD be changed, but then you have to really stress/strech the Wiring, checked that, but the Wire Colours are connected to the right solenoids. I don´t know but i would not expect that the Solenoi...
by terbo
Fri May 18, 2018 11:52 am
Forum: Diagnostic discussion
Topic: VW 3,2 L V6 CAM/CRK vs OBD-Tool
Replies: 7
Views: 9284

Re: VW 3,2 L V6 CAM/CRK vs OBD-Tool

Hi, Thank you for the Feedback. Connection was made with Common Earth from one of the Sensors, and the Positiv Leads going to the Sensors. The Sensor Pickup (ring) is bolted with a few Screws, that can´t change in my opion. If they don´t get it straight the 4.th time , i will do same with the WPS500...
by terbo
Tue May 15, 2018 9:09 pm
Forum: Diagnostic discussion
Topic: Polo 1,2 3-Cyl. - WPS 500 Pressure Question
Replies: 17
Views: 34647

Re: Polo 1,2 3-Cyl. - WPS 500 Pressure Question

Just noticed this one was not completed, i never get a Notification from the Forum, don´t know why.Anyways.... The Problem with this Car "Glowing Cat" was solved with a new Engine ECU. Don´t know what went Bananas in that thing, but with a used one the car drives nice as before but no more extrem He...
by terbo
Tue May 15, 2018 8:51 pm
Forum: Diagnostic discussion
Topic: VW 3,2 L V6 CAM/CRK vs OBD-Tool
Replies: 7
Views: 9284

VW 3,2 L V6 CAM/CRK vs OBD-Tool

Hi, A friend has a 2008 EOS V6 that has P0016 & P0017 Codes related to the CAM/CRK Correlation,the Timing Chain Set was replaced and adjusted / refitted now for the third time.The Codes are coming right back after startup. According to VCDS, the Timing is -11 Degress off.... Can someone explain how ...
by terbo
Tue Apr 24, 2018 7:07 pm
Forum: Diagnostic discussion
Topic: Polo 1,2 3-Cyl. - WPS 500 Pressure Question
Replies: 17
Views: 34647

Re: Polo 1,2 3-Cyl. - WPS 500 Pressure Question

Wow, thank you for these Infos.I coukd not get my head around that.

I Will have to look into more infos on WPS Tests.
But makes total sense so far to me.
by terbo
Mon Apr 23, 2018 4:58 pm
Forum: Diagnostic discussion
Topic: Polo 1,2 3-Cyl. - WPS 500 Pressure Question
Replies: 17
Views: 34647

Re: Polo 1,2 3-Cyl. - WPS 500 Pressure Question

Oh, ok...that would be a bummer, because the Waveform at idle
looks ok in sight of the Pressures.
by terbo
Mon Apr 23, 2018 10:36 am
Forum: Diagnostic discussion
Topic: Polo 1,2 3-Cyl. - WPS 500 Pressure Question
Replies: 17
Views: 34647

Re: Polo 1,2 3-Cyl. - WPS 500 Pressure Question

The Case Study is nice.
I will read it complete later, i just had a quick look.
Biggest difference is that the Polo in the Case study is
a 12 Valve with 2 CAMs, ours is a 6 Valve with only one
CAM.

Onyl have Handy Access at the time....