Search found 24 matches

by rburgy
Wed Jun 03, 2020 3:43 pm
Forum: Diagnostic discussion
Topic: 14 RAM hemi misfire
Replies: 2
Views: 4223

14 RAM hemi misfire

Hello everyone. I have a misfire situation here that I wondered if I could get a little help with what direction to go in. First of all. this was bought at the auction. Its a 2014 RAM 2500 P/U with a 6.4L HEMI with 175K miles Trouble code is simply a p0300 multiple miss. the cylinders missing are 1-...
by rburgy
Sat Nov 25, 2017 1:00 am
Forum: Diagnostic discussion
Topic: compression waveform help
Replies: 4
Views: 6236

Re: compression waveform help

Hello, Please look at the moment of opening of exhaust valve:look how fast the cylinder pressure decrease/compared to the cylinder pressure increase.Try to record also the pressure in intake or exhaust.Sometimes only the compression will not show the issues... :? Regards just to clarify, are you sa...
by rburgy
Thu Nov 23, 2017 4:11 pm
Forum: Diagnostic discussion
Topic: 2007 Saturn Sky Cam/Crank relationship
Replies: 1
Views: 3332

Re: 2007 Saturn Sky Cam/Crank relationship

it should line up like every other GM. take a shot of it and post it. should be able to tell pretty easy if
its off or not.
by rburgy
Thu Nov 23, 2017 2:06 am
Forum: Automotive kit hardware
Topic: Pico Staff on the forum
Replies: 2
Views: 23719

Re: Pico Staff on the forum

i placed an automotive question on the introduction board. im sorry, can you please move it for me?
having a bad day.
rburgy
by rburgy
Thu Nov 23, 2017 2:01 am
Forum: Diagnostic discussion
Topic: compression waveform help
Replies: 4
Views: 6236

compression waveform help

I have a 2002 Ford Escape 3.0L engine. have a dead misfire on number 2 cylinder. found broken exhaust valve springs on number 2 cylinder. replaced #2 exhaust valve springs. number 2 still misses constantly. checked for spark and fuel with no issues there. If i was out of time, at least the whole rea...
by rburgy
Fri Aug 26, 2016 10:28 pm
Forum: Diagnostic discussion
Topic: General automotive knowledge Q&A
Replies: 2
Views: 4351

General automotive knowledge Q&A

Gentleman. I just recieved an article from one of the automotive insite websites I belong to. This weeks issue was about carbon deposits causing running problems on VW and AUDI direct injected vehicles. Also talked about camshafts wearing due to poor tempering of the camshafts. Anyway, regarding the...
by rburgy
Mon Jun 27, 2016 12:45 am
Forum: Introductions
Topic: Brexit questions/concerns
Replies: 5
Views: 8156

Brexit questions/concerns

To all my helpful men and women. Both at Pico and in the industry.
I hope everything goes well for you guys going forward. I hope if this is
What you guys wanted- it works out for you.
Just very confusing for me in the USA.
Good luck.
by rburgy
Fri Jun 10, 2016 3:44 am
Forum: Help me fix my car
Topic: dodge pickup no crank rpm
Replies: 8
Views: 15296

Re: dodge pickup no crank rpm

You guys hit the nail on the head. The good engine came out of a jeep product& was put into a dodge truck. As it turns out the crank shaft reluctor wheels were in fact different. Thank you guys so much for the help. I would have put a PCM in it and then been stumped.
by rburgy
Sat Jun 04, 2016 12:42 am
Forum: Help me fix my car
Topic: dodge pickup no crank rpm
Replies: 8
Views: 15296

Re: dodge pickup no crank rpm

The flywheel was switched pver as it was the only one i had. I agree with the bad ground also. However, i checked all volts inputs and grounds coming into PCM. All were good. I jumped a good ground to that pcm terminal, re-checked with the scope- and all of my waveforms were perfect and still no RPM...
by rburgy
Fri Jun 03, 2016 1:42 am
Forum: Help me fix my car
Topic: dodge pickup no crank rpm
Replies: 8
Views: 15296

dodge pickup no crank rpm

hey guys. wanted to see if you guys would take a look at a waveform for me and give me some input. 2003 dodge r1500 4.7l. installed used engine. I have no engine rpm on scan tool. I can put the waveform up if you tell me how to move it from the waveform library to here?? I checked for 5v, signal, gr...