Hi guys, I would really appreciate some feedback on this issue please, all welcomed. I'm an avid follower of the forum and a large commercial vehicle tech, but working on 'mum's' runaround today! I have an issue with a Nissan Qashqai 2.0 dci, 57year throwing a P1435 error. It has set the MIL lamp bu...

To close this thread, the lads that have been working on my off days over Christmas have put this van back together, the chain was stretched, jumped two teeth! And the tensioner was out 3/4 travel compared to the new one at a 1/4 protrusion. We bought the correct timing kit to set up the marks as I ...

Sorry, no recorded cam capture as yet other than when we checked for good signal at ecu. (Pull down from 12v). Timing cover off ti'll after Christmas awaiting chain / sprocket kit. I'm out on the road most of the time supporting heavy goods vehicle systems so when back in workshop I have limited tim...

With no good waveforms available before we stripped, had to be timing, found chain jumped crank timing gear one tooth. Lucky save! No damage.If I have time, I'll scope the good'un.

Hi all, 1st post here, love the tech topics here. I'm after a waveform for Cam/Crank sync for a Nissan Primastar 2.0 DCi (not 1.9 F9Q) 2007. 80,000m Similar to Vauxhal Vivaro, Renault Master etc. The door plate shows a FL0M sticker? The vehicle in question has just come in with poor running,P0340 co...

Hi all, Great Pico website and forum. Using scopes quite a lot now and enjoy reading the case studies and final fixes.
Regards,
Wayne