Hello and thank you for the posts As Ben has mentioned the software teams are on the case with the acquisition of e-motor speed via the diagnostic system In the interim, something you mentioned above "We want all tree variabels in an ideal world but would be happy if we could ditch ICE speed for Ele...

Hello and thank you for the post

Would you have the psdata file with the ignition coil primary windings shorted?

If you can upload here that would be great and I will run through the analysis options

Take care....Steve

Hello Keith and welcome to the forum, thank you for the post Whenever this question comes up I always recommend the 4-Channel Standard kit here https://www.picoauto.com/products/automotive-oscilloscope-kit/picoscope-kits-hardware#comparekits 4-Channels are a must so as to ensure you have enough opti...

Hello and thank you for the post I have searched the Auto forum with little or no joy for USB isolators (I have not used one) Switching over to the T&M forum, there appears to be a number of discussions on this topic with mixed reviews Noise, connectivity and power delivery seem to be the main topic...

Hello and welcome to the forum and thank you for the introduction. Based on your experience both Auto and Avionics it would be awesome to have your feedback on forum posts and case studies where the devil is in the detail of the captured data Regarding the 2205A, this is certainly a lot of scope, bu...

Hello and thank you for the feedback, sorry for the late reply Below I have used the “right-click” Channel in view option to focus on cabin vibration first We have a strong T1 lateral vibration in the cabin (This is strong enough to be felt by the occupants) Note also P1 is there too 1.png If we now...

Hello and thank you for the feedback Just reading through the posts, you mentioned the 4425-030 scope works OK with a USB 2.0 port on your Getac machine? I ask because this confirms the scope to be OK Kev also mentioned using the genuine Pico Blue USB cable, could you confirm this is the case? Could...

Hello and thank you for the post

The following forum post may help (using the CRTC engine) https://www.picoauto.com/support/topic22982.html

Have you also tried the Reference Waveform Library (RWL?)

Ben's video will help here https://www.youtube.com/watch?v=M4YPL-zmZw4

Take care......Steve

Hello and thank you for the post, sorry for the late reply. Looking at the decoded data and using the search function I too cannot see MID 140 MID 140 is referred to as Instrument Cluster here https://www.simmasoftware.com/wp-content/uploads/j1587-introduction.pdf 10.png Looking at the protocol for ...

Hello and thank you for the post, welcome to the forum. The Guided Tests within PicoScope 7 Automotive will help when it comes to taking your first capture They can also be found here https://www.picoauto.com/library/automotive-guided-tests Further help can be found here https://www.youtube.com/chan...