Search found 6 matches

by MJRVR
Thu Jun 12, 2014 2:39 pm
Forum: Diagnostic discussion
Topic: 2004 Ford Focus 1.8TDCI
Replies: 10
Views: 15281

Re: 2004 Ford Focus 1.8TDCI

Thanks for the info Rob.
Much appreciated.
by MJRVR
Thu Jun 12, 2014 6:44 am
Forum: Diagnostic discussion
Topic: 2004 Ford Focus 1.8TDCI
Replies: 10
Views: 15281

Re: 2004 Ford Focus 1.8TDCI

I confirmed the LP side earlier.
The remote feed for me eliminated potential faults on the LP side.

Not sure what you mean by a proof test though.
by MJRVR
Wed Jun 11, 2014 9:21 pm
Forum: Diagnostic discussion
Topic: 2004 Ford Focus 1.8TDCI
Replies: 10
Views: 15281

Re: 2004 Ford Focus 1.8TDCI

Rob

The pump proof test, is that with the IMf ect disconnected, fuel feed direct into the pump and measure full obtainable pressure?
If so it was about 125,000KPA from memory.

Will run some more tests tomorrow.

thanks again
by MJRVR
Wed Jun 11, 2014 7:15 pm
Forum: Diagnostic discussion
Topic: 2004 Ford Focus 1.8TDCI
Replies: 10
Views: 15281

Re: 2004 Ford Focus 1.8TDCI

Thanks Rob. Compressions sound good. but will test for sure with gauge tomorrow. Runs fine on sniff. Found some more info: Came in as non runner, Petrol was suspected to have been put in by mistake, Customer denies it. Tank drained, fuel replaced, still trying to fire on cranking but wont run, also ...
by MJRVR
Wed Jun 11, 2014 4:38 pm
Forum: Diagnostic discussion
Topic: 2004 Ford Focus 1.8TDCI
Replies: 10
Views: 15281

Re: 2004 Ford Focus 1.8TDCI

Thanks for the reply Robski. I dont know where they were from to be honest as I didnt ask. I know they were new and not secondhand. Delphi boxes were on their bench. They say they coded them in correctly. Just to add no fault codes and fuel pressure cranking between 26,000 KPA and 34,000 KPA Could t...
by MJRVR
Wed Jun 11, 2014 1:00 pm
Forum: Diagnostic discussion
Topic: 2004 Ford Focus 1.8TDCI
Replies: 10
Views: 15281

2004 Ford Focus 1.8TDCI

Hi I have been to look at a Ford Focus thats a non starter. I have scoped the injectors and all seem to be missing the main injection event? I'm new to the scope so please bear with me. They are Delphi injectors and before I got to the car two new ones have been fitted because of excess leak off. It...