well decided to go oldschool and remove sensor as i couldn't get a trace cleaning an refitting seems to have solved the fault for the moment. thanks for the help every one still going to look for a low amp clamp as active abs sensors are bound to be more and more common. thanks again
Is the 30amp probe a better option then Alan don't think i have much chance of looping but will give it a go tomorrow. I did have low pass filter on i will try and implement the other suggestions. Thanks
Hi Rob i have the same spec for current as you but after a lot of messing around failed to get anything of any use tried taking reference from the other side but getting bog all. Is the standard low amps clamp capable of picking up such a small signal? i had it set to 500mA but seem to only get back...
As per the title does anyone have an Sample waveform available for an active abs sensor on a Vauxhall/Opel insignia. Don't think it matters but this is a 2010 1.8 eco wreck engine.
Thanks Very much
Hi Rob I was at the timing side rather then gearbox side i checked which injector by unplugging one and seeing which one came up on diagnostics. Misfire was not present but it i have driven the vehicle and it does seem to be underpowered. I will check figures tomorrow again on live data and come bac...
Been looking at an M9R 2007 Renault Traffic came with a complaint of misfiring intermittently code stored was df0026 injector 1 circuit fault. I have been scoping the injectors with a current clamp. Injector 1 was at 2.7 at idle on the correction factors all others seem to be negative and less then ...
peugeot 206 1.4 lambda back probed at connector and earthed at the battery but the amount of noise is ridiculous tried a couple of different earths and different croc clips??
ta very much