Search found 317 matches

by Fat Freddy
Tue Dec 11, 2018 1:09 pm
Forum: Forum feedback
Topic: Capcha
Replies: 60
Views: 20874

Re: Capcha

Painful. :(
by Fat Freddy
Fri Oct 19, 2018 11:18 am
Forum: Diagnostic discussion
Topic: Nissan Micra CAM/CKP known good needed
Replies: 14
Views: 904

Re: Nissan Micra CAM/CKP known good needed

Hi ,cam flop occurs on very new engines too. Don't need to have any worn parts (chain or gear). The oil pressure is just not enough at times, also at idle. However cam flop is not the cause of a no start. Hi. I'm aware cam flop can occur with new engines. A new chain almost eliminated that 'flop'. ...
by Fat Freddy
Mon Oct 15, 2018 1:28 pm
Forum: Diagnostic discussion
Topic: Nissan Micra CAM/CKP known good needed
Replies: 14
Views: 904

Re: Nissan Micra CAM/CKP known good needed

The reason I posted was because landroverman1958 was describing what is considered a good Nissan 1,3,4,2 waveform should look like. What I wanted to point out was a bad waveform did not necessarily mean a bad cam, sensor or capture. It was as 'Speck' pointed out 'cam flop' that caused the odd patter...
by Fat Freddy
Mon Oct 15, 2018 1:11 pm
Forum: Diagnostic discussion
Topic: Nissan Micra CAM/CKP known good needed
Replies: 14
Views: 904

Re: Nissan Micra CAM/CKP known good needed

My post was reply to landroverman1958 how claimed that CR14 1,4L (from first post) has same pattern as 1,2L he posted image about. We can arque what means identical engine but there are engines that are the same with same engine code but pattern changes in years. So if engine code is the same but c...
by Fat Freddy
Thu Oct 11, 2018 1:38 pm
Forum: Diagnostic discussion
Topic: Nissan Micra CAM/CKP known good needed
Replies: 14
Views: 904

Re: Nissan Micra CAM/CKP known good needed

Good morning that is a bad wave form,of the cam,it should show the cylinders trigger points for each cylinder in firing order,eg i342 with notches shown as 1,111,1111,11.i have got a wave form somewhere,,,,, Don't be so sure. This is a Nissan cam capture. Nothing wrong with the setup, cam or sensor.
by Fat Freddy
Mon Sep 04, 2017 12:55 pm
Forum: Forum feedback
Topic: Capcha
Replies: 60
Views: 20874

Re: Capcha

After 45 mins or trying to prove I am not a robot. I am still a robot. No images today.
by Fat Freddy
Mon Sep 04, 2017 12:19 pm
Forum: Forum feedback
Topic: Capcha
Replies: 60
Views: 20874

Re: Capcha

Over two years and this problem persists! Why?

Hours spent on details to spend god knows how long to upload it. So frustrating. It really puts one off contributing.
by Fat Freddy
Mon Sep 04, 2017 12:13 pm
Forum: Diagnostic discussion
Topic: Individual cylinder valve timing errors
Replies: 18
Views: 4481

Re: Individual cylinder valve timing errors

Since this came through as a newsletter it gave me the chance to re look at the findings. First, I would like to explain why I am beating this drum hard. When I first started scoping, I used to take every piece written by proclaimed guru's and the mentors as gospel. Only years later finding out what...
by Fat Freddy
Mon Sep 04, 2017 1:29 am
Forum: PicoScope 6 Automotive software
Topic: Maths Channel crash report
Replies: 1
Views: 410

Maths Channel crash report

Viewing Steve's file from here. https://www.picoauto.com/library/training/individual-cylinder-valve-timing-errors?mc_cid=def56a3dfe&mc_eid=2a67963477 Every time I select Tools, Math Channel it's followed by a crash. Won't let me send crash report. Using software version: 6.12.7.2724. Windows 10. No ...
by Fat Freddy
Sat Sep 02, 2017 1:36 pm
Forum: Diagnostic discussion
Topic: HVAC RMS
Replies: 10
Views: 2463

Re: HVAC RMS

Like the theory STC but in the real world you wouldn't last five seconds. In fact some of your text book ideas will destroy an AC system. It's the kiss of death. - period.