Probably not the answer you wanted to hear !
Search found 131 matches
- Sat Dec 21, 2019 10:55 pm
- Forum: PicoScope 6 Automotive software
- Topic: toyota scope 4423
- Replies: 2
- Views: 190
Re: toyota scope 4423
The OEM supplied units are locked down to the software that is distributed to the OEM (in this case Toyota) so unless you have access to the Toyota dealership servers the scope is a very ornamental doorstop.
Probably not the answer you wanted to hear !
Probably not the answer you wanted to hear !
- Mon Nov 18, 2019 10:33 am
- Forum: Diagnostic discussion
- Topic: relative compression help
- Replies: 7
- Views: 508
Re: relative compression help
That will be a no on the noid light!
Measure your injector resistance and explore your bulb rack for the nearest match you have.
Kev.
Measure your injector resistance and explore your bulb rack for the nearest match you have.
Kev.
- Sun Nov 17, 2019 10:50 pm
- Forum: Diagnostic discussion
- Topic: relative compression help
- Replies: 7
- Views: 508
Re: relative compression help
Paul,
Although the injectors are disconnected the PCM will still be actuating them, so just pick up a signal from number one injector as you would normally do as your sync. You can also substitute a bulb in place of the injector and use your amp clamp as well.
Kev.
Although the injectors are disconnected the PCM will still be actuating them, so just pick up a signal from number one injector as you would normally do as your sync. You can also substitute a bulb in place of the injector and use your amp clamp as well.
Kev.
- Mon Oct 14, 2019 10:28 am
- Forum: Diagnostic discussion
- Topic: Bosch LSU strange result
- Replies: 6
- Views: 2611
- Thu Oct 10, 2019 5:37 pm
- Forum: Diagnostic discussion
- Topic: Valve timing with wps
- Replies: 7
- Views: 1053
- Mon Aug 19, 2019 7:17 am
- Forum: Introductions
- Topic: Picoscope 2206B
- Replies: 2
- Views: 318
Re: Picoscope 2206B
Are you trying to use the automotive software? If so that is your problem, the 2000 series scopes are T&M scopes and do not work with the automotive software! Also you will not have access to the automotive library. :( You will need to download the test and measurement software
Jump to post
- Fri Aug 02, 2019 6:39 pm
- Forum: Help me fix my car
- Topic: Test Plan for Smart Charging System on Ford Fiesta 1.4 (SPJC)
- Replies: 20
- Views: 1881
Re: Test Plan for Smart Charging System on Ford Fiesta 1.4 (SPJC)
Can that the linbus signal (and the other protocols we see) can be Generated with the new 8 Channel Scope ? In a word No! :cry: Click this link and you will see the AWG specs and at +/- 2V and a specific ra...
- Mon Jul 29, 2019 11:50 am
- Forum: Diagnostic discussion
- Topic: Diagnosising old school ignition coil
- Replies: 8
- Views: 872
Re: Diagnosising old school ignition coil
Hi Hexi. (Sorry I do not know your name) There are various clues in the coil primary trace in both the turn on and the turn off zones. Coil ringing as the energy dissipates at the end of the duty cycle can also be quite revealing. Coil amperage is also a very good indicator of a failing coil. Always...
- Thu Jul 04, 2019 9:53 am
- Forum: Automotive kit hardware
- Topic: 8-Channel Oscilloscope for Automotive?
- Replies: 31
- Views: 20609
Re: 8-Channel Oscilloscope for Automotive?
2 Bits..... 
- Tue Jul 02, 2019 10:21 am
- Forum: Diagnostic discussion
- Topic: Raster Parade, etc,..
- Replies: 10
- Views: 1011
Re: Raster Parade, etc,..
How about the Mix Master unit?
https://www.picoauto.com/products/ignition-accessories/mixmaster-12-channel-automotive-signal-mixer
2 x 6 or 1 x 12 max cylinder inputs and not terribly expensive
Kev.
https://www.picoauto.com/products/ignition-accessories/mixmaster-12-channel-automotive-signal-mixer
2 x 6 or 1 x 12 max cylinder inputs and not terribly expensive
Kev.