copy & paste as image Skewed

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
rvicelli
Newbie
Posts: 5
Joined: Sun Mar 04, 2007 11:28 pm
Location: Cicero, IL USA

copy & paste as image Skewed

Post by rvicelli »

Hi, I was trying to copy and paste as image from a saved pattern (which was saved using "save current waveform"). During the paste the pattern was skewed compared to the cursors. In other word the cursors and time frames showed correctly but the pattern was not in the same relationship to them. Attached is an example. Possiblly a problem in my PC but other patterns saved with "save all waveforms as". All were saved a PSD file. This is with R6.06.0. In the attached file only channel D was wrong.
Thanks
Rob 8)

Sorry cannot attach psd file
If it aint broke...save it

davidj
OneWave
OneWave
Posts: 24
Joined: Wed Oct 11, 2006 8:50 am
Location: St. Neots, Cambs, UK

Post by davidj »

Hi Rob
Depending on what you are trying to achieve, the most reliable method of copy and pasting a screen view is using the Prt Scr keyboard button and then pasting into a Word document, for example.

If you register you will be able to attach files.
Regards,
David

rvicelli
Newbie
Posts: 5
Joined: Sun Mar 04, 2007 11:28 pm
Location: Cicero, IL USA

Post by rvicelli »

I thought I was logged in. Anyway Thats is what I did (PrtScn) after. I just thought it was odd since it was just 1 channel and you might want to know.

Thanks for a great product 8)
If it aint broke...save it

Post Reply