Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
markzb
Post
by markzb » Wed May 14, 2003 9:04 am
Hi everyone
Trying to do away with a automotive gas analyser on the cheap....are there any sensors available that we can use to hook up our picoscopes to to measure hydrocarbon levels at the tailpipe?
Regards
Mark
markspencer
Pico Staff Member
Posts: 6 Joined: Wed May 07, 2003 9:45 am
Post
by markspencer » Thu May 15, 2003 8:01 am
Hi,
Our equipment is not really designed for this purpose ... but you may be able to source a product that will do this. You could check this website out
www.aeswave.com
Perhaps someone else on the forum has already done this and may be able to give you some advice.
Best regards,
Regards,
Mark Spencer
william.gordon@williamgor
Post
by william.gordon@williamgor » Thu May 22, 2003 7:03 pm
I have adapted the Pico 212/3 to read the AFR (Lambda) on vehicles with an oxygen sensor. Interested?
Carl Grotti
OneWave
Posts: 32 Joined: Thu Nov 21, 2002 5:17 am
Location: Missouri, USA
Post
by Carl Grotti » Sat May 24, 2003 4:26 am
Hi William,
I have adapted the Pico 212/3 to read the AFR (Lambda) on vehicles with an oxygen sensor. Interested?
Yep, show us what you have.
Regards,
_______
Carl