WPS500X - TA086 Bleed hose question

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
User avatar
VASTech
OneWave
OneWave
Posts: 38
Joined: Sat Oct 10, 2015 6:58 am
Location: Southeastern Europe

WPS500X - TA086 Bleed hose question

Post by VASTech »

Hello!
Anyone know what size of brass nut has TA086 bleed hose adapter?

Thank you!
Attachments
TA086large.jpg

PhilS
Pico Staff Member
Pico Staff Member
Posts: 39
Joined: Thu Aug 16, 2012 7:24 am

Re: WPS500X - TA086 Bleed hose question

Post by PhilS »

Hi dorcky

It is a half inch (approx 12.7mm) connector.

I hope that is the information you needed.

Best regards,
Phil

User avatar
VASTech
OneWave
OneWave
Posts: 38
Joined: Sat Oct 10, 2015 6:58 am
Location: Southeastern Europe

Re: WPS500X - TA086 Bleed hose question

Post by VASTech »

Not quite sure if is a half inch. I measured on wp500 bleed male, and I've got ~11mm. But I'm quite sure that is not metric is most likely imperial. Friend Google say a match of 7/16" at ~11mm but I don't know... Keep looking.
Thank you!

PhilS
Pico Staff Member
Pico Staff Member
Posts: 39
Joined: Thu Aug 16, 2012 7:24 am

Re: WPS500X - TA086 Bleed hose question

Post by PhilS »

Hi dorcky

If you are talking about the outside flat-to-flat on the brass nut then it is half inch.

I can be sure about my sample from stock as I measured it last night and this morning.

Let me know if you were after something different as I may not have been measuring what you wanted.

Best regards,
Phil
Attachments
TA086 nut
TA086 nut

User avatar
VASTech
OneWave
OneWave
Posts: 38
Joined: Sat Oct 10, 2015 6:58 am
Location: Southeastern Europe

Re: WPS500X - TA086 Bleed hose question

Post by VASTech »

I need inside diameter. Sorry for misleading!

User avatar
VASTech
OneWave
OneWave
Posts: 38
Joined: Sat Oct 10, 2015 6:58 am
Location: Southeastern Europe

Re: WPS500X - TA086 Bleed hose question

Post by VASTech »

I need a type of that nut, to be able to buy one. I think is a 7/16 thread.
Question is :
it is a 7/16-14 UNC or 7/16-20 UNF thread.
Regards!

PhilS
Pico Staff Member
Pico Staff Member
Posts: 39
Joined: Thu Aug 16, 2012 7:24 am

Re: WPS500X - TA086 Bleed hose question

Post by PhilS »

Hi dorcky

Sorry for being so dim.

The brass nut is 1/8” FPT, designed to mate with the brass 1/8” MIP bleed port fitting.

I hope I have given you the information you needed.

Best regards
Phil

User avatar
VASTech
OneWave
OneWave
Posts: 38
Joined: Sat Oct 10, 2015 6:58 am
Location: Southeastern Europe

Re: WPS500X - TA086 Bleed hose question

Post by VASTech »

Well, not find so far what type of nut is that one. Nothing seems to match. 1/8" BSPP male is only 8.7 mm inside. 1/4" BSPP male is 11.6 mm inside. FOSTER 2202 Quickplug and 22-2 adapter is (1/8" NPT) - 10 mm - not match with what I need.

The bleed brass adapter screwed in WPX is 10mm inside (1/8" MPT) and 11 mm outside and don`t know what type is.
Attachments
20180315_202434.jpg

PhilS
Pico Staff Member
Pico Staff Member
Posts: 39
Joined: Thu Aug 16, 2012 7:24 am

Re: WPS500X - TA086 Bleed hose question

Post by PhilS »

Hi dorcky

Really sorry for the delay as I have been travelling.

Please always feel free to email support@picotech.com for anything requiring an answer.

Anyway, the details are:

The Thread size for the ¼” OD compression is 7/16" X 24

The brass fitting is a part of the Watts A-22 (LFA-22) Compression fittings, complete with an “Ander-Lign” tube to male pipe connector with brass insert. The O.D. threaded piece is 1⁄4" OD Comp. X 1⁄8" MIP

Best regards,
Phil

Post Reply