new to pico

Come here to introduce yourself, who you are, what you do, and tell us your
experience with our automotive products.
Post Reply
joeyoshea
Newbie
Posts: 4
Joined: Fri Mar 02, 2018 12:00 pm

new to pico

Post by joeyoshea »

hi all im new to pico but not using a scope been using a snap on verus pro for quiet awhile now and decided after seen a few pico in operation that id bite the bullet and buy a advance kit from my local supplier
im here really to find out how to add scope traces to the pico libary
was looking for a wheel speed trace on a 2013 audi a6 but couldnt find any
so after i fix the one i was at im left with a good trace of both front abs sensors would like to add them to libary to
others if they ever need it

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1581
Joined: Sun Aug 25, 2013 7:22 am

Re: new to pico

Post by Steve Smith »

Hello and thank you for the post.

Welcome to the forum and thank you for choosing the Pico Advanced kit.
Here begins another diagnostic journey for sure and one where you will find a huge amount of support here and at https://www.picoauto.com

It would appear you have all the requirements in place to access the Waveform Library but lets just go through them now.

1. Your PC needs to be connected to the Internet.
2. You require a user name and Password for the Pico Auto Forum. (Which must be in place as you have posted here)
3. Your Automotive PicoScope needs to be connected to your PC when attempting to access the Waveform Library

The following link will guide you through the connection/set up
topic10063.html

I hope this helps, take care......Steve

Post Reply