hi all im new to pico but not using a scope been using a snap on verus pro for quiet awhile now and decided after seen a few pico in operation that id bite the bullet and buy a advance kit from my local supplier
im here really to find out how to add scope traces to the pico libary
was looking for a wheel speed trace on a 2013 audi a6 but couldnt find any
so after i fix the one i was at im left with a good trace of both front abs sensors would like to add them to libary to
others if they ever need it
Welcome to the forum and thank you for choosing the Pico Advanced kit.
Here begins another diagnostic journey for sure and one where you will find a huge amount of support here and at https://www.picoauto.com
It would appear you have all the requirements in place to access the Waveform Library but lets just go through them now.
1. Your PC needs to be connected to the Internet.
2. You require a user name and Password for the Pico Auto Forum. (Which must be in place as you have posted here)
3. Your Automotive PicoScope needs to be connected to your PC when attempting to access the Waveform Library
The following link will guide you through the connection/set up topic10063.html