ford ztec 1.6

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
johnchad
Newbie
Posts: 3
Joined: Sun Apr 23, 2006 10:34 pm
Location: yorkshire

ford ztec 1.6

Post by johnchad »

:oops: this may be a silly question but here goes. lost spark on above vehicle, crank and knock sensors ok both show good patterns. relays and fuses ok also coil checks out ok. I would like to check out the earth switching on the coil pack and at ecu - but i can not seem to connect up the scope for any reading? what am i doing wrong? many thanks

tim bowkett

ford 1600

Post by tim bowkett »

have you scoped the primary circuit at the coil this will prove if the ecu is triggering the coil,this proving that the power stage and the trigger are ok

Post Reply