channel A & B swap when using drop down menus for sensor

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
jez1342
OneWave
OneWave
Posts: 12
Joined: Thu Jan 19, 2006 6:55 am
Location: weymouth

channel A & B swap when using drop down menus for sensor

Post by jez1342 »

if i use certain drop down menus for sensor tests ie, abs and accelerator pedal sensors the scope swaps channel A with channel B which is quite confusing! is it something i've done as i have never noticed this before. suggestions welcome. regards Jez.

Alan
Pico Staff Member
Pico Staff Member
Posts: 264
Joined: Thu May 25, 2006 8:02 am

Post by Alan »

Hi,

I seem to remember this was a bug on one version of the sofware a while back. Suggest you download the latest version.

Regards
Alan

jez1342
OneWave
OneWave
Posts: 12
Joined: Thu Jan 19, 2006 6:55 am
Location: weymouth

Post by jez1342 »

cheers alan. reinstalled it a few weeks ago. don't really know if it has worked or not because i've been playing with, i mean using, the pico 6 program which is brilliant.

Post Reply