PicoScope Automotive Top Tips

Ask any questions about using PicoScope Automotive software here.
User avatar
Posts: 363
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: PicoScope Automotive Top Tips

Post by Autonerdz » Sat May 09, 2015 1:09 am

Peak pressure can be a pretty good gauge of TDC. Just have to be certain that is a good well sealed cylinder and the engine speed is slow.....cranking or idle.

Pico Staff Member
Pico Staff Member
Posts: 6
Joined: Wed Oct 02, 2013 8:53 am

Re: PicoScope Automotive Top Tips

Post by Hitesh » Fri Jan 06, 2017 10:20 am

We also have an FAQ Document for the standard version of PicoScope which is for our Test and Measurement PicoScope models, but can also be used with the PicoScope Automotive software.

This covers a number of items from connection issues between the scope and the PC to limits placed on the number of samples that can be collected for a waveform.

Hope its of use.

Technical Specialist
Pico Technology

Post Reply