Audi A4 BLS cam vs crank sync

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Audi A4 BLS cam vs crank sync

Post by victor2k »

Hello,
On 2005 Audi A4 /BLS engine type I have P0341 readed with KTS.
I can't find suport in Esitronic for this fault code.The camshaft sensor was replaced,the timing was checked.
The signals was captured at the ECU side ,but I can't find a SSP for Audi 2005 with 1,9 diesel.
SSP036,SSP209 show me other type of the camshaft signal pattern.
Please tell me what is wrong in the captured signals
Thank you
Attachments
Audi_A4_2005_20161228-0001.psdata
(901.2 KiB) Downloaded 566 times
Last edited by victor2k on Wed Dec 28, 2016 11:25 am, edited 1 time in total.

victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Re: Audi A4 BLS cam vs crank sync

Post by victor2k »

The faulty camshaft sensor was the cause of DTC. :cry:

User avatar
STC
Banned
Posts: 790
Joined: Sun Sep 13, 2015 2:10 am

Re: Audi A4 BLS cam vs crank sync

Post by STC »

Hi Victor.

Now it is fixed we can only gain education.

I could not fault the Camshaft Sensor in your Waveform. What was your reason / evidence / thinking for replacing it ?

victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Re: Audi A4 BLS cam vs crank sync

Post by victor2k »

Hello,
The reference signal for camshaft isn't like my captured signal .
Also the replaced sensor wasn't OE.Again the aftermarket sensor make my life difficult.
:oops:

Post Reply