Audi A4 BLS cam vs crank sync

Hello,
On 2005 Audi A4 /BLS engine type I have P0341 readed with KTS.
I can't find suport in Esitronic for this fault code.The camshaft sensor was replaced,the timing was checked.
The signals was captured at the ECU side ,but I can't find a SSP for Audi 2005 with 1,9 diesel.
SSP036,SSP209 show me other type of the camshaft signal pattern.
Please tell me what is wrong in the captured signals
Thank you

The faulty camshaft sensor was the cause of DTC.

Hi Victor.

Now it is fixed we can only gain education.

I could not fault the Camshaft Sensor in your Waveform. What was your reason / evidence / thinking for replacing it ?

Hello,
The reference signal for camshaft isn't like my captured signal .
Also the replaced sensor wasn't OE.Again the aftermarket sensor make my life difficult.