It looks like by your scaling that it is at 10 volts per division and the Injector bat supply is at 14-15 Volts and the ground is at 8-900 millivolts, However I don't know how you have your amp clamp set up. How many millivolts per amp is is on your clamp? Also I'm sorry but I don't understand your language and I don't have a translator. I need to understand your question first before going any farther.
Google translates this as
can see that this gun (gun being injector ??) does not have open issues and injector needle closure but already I will post a picture of the same car but with gun with locked needle and opening not enough to feed the cylinder, have current inductive kick is that the current circulates in enrrolamento is not being enough to move the needle and act correctly, this vehicle was running with bad fuel smell at the exhaust and as here in Brazil we use ethanol and issuportavel smell.
-->
xandro wrote:
injetor montana flex.bmp
Google translates this as
can see that this gun (gun being injector ??) does not have open issues and injector needle closure but already I will post a picture of the same car but with gun with locked needle and opening not enough to feed the cylinder, have current inductive kick is that the current circulates in enrrolamento is not being enough to move the needle and act correctly, this vehicle was running with bad fuel smell at the exhaust and as here in Brazil we use ethanol and issuportavel smell.
Probably best starting another topic. But can't tell much from that image. Unfortunately shows the beauty of Pico. What makes you think the image shows a problem.
Ciaoo a tutti...Mi chiamo Tommy Evolini sono di Milano ed ultimamente ho acquistato il pico 4424 kit avanzato,nhw 4 assi,wps500,è dal 95 che utilizzo l'oscilloscopio,sono partito con un vecchio bosch a tubo catodico analogico,successivamente negli anni ho acquistato il 4 canali di Bosch 450 e il Motor tester 720 Sempre di Bosch che sono molto performanti sopratutto quando si analizza l'accensione secondaria,possiedo anche l'uniprobe di texa come generatore di segnali,ma le capacità della strumentazione di pico sono ineguagliabili,molto semplice,intuitivo ma estremamente efficace nelle acquisizioni!!!
Spero di migliorare sempre di più per imparare a sfruttare tutte le funzioni infinite presenti nel Software di pico!!