Secondary ignition probes on 4 cylinders

Ask for and share advice on using the PicoScope kit to fix vehicles here.
User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: Secondary ignition probes on 4 cylinders

Post by Autonerdz »

What happens in the cse of the KING lead built in to the distributor. I am working on this ka24e engine
Coil in Cap eh? OK, If I recall, there is a ridge on that cap for the bridge between the internal coil and rotor. Place your pickup on that ridge. You have only enough capture time for one event. Please try my other suggestions. Do not use the automotive setup menu. Set it up yourself.

bonecrusher
OneWave
OneWave
Posts: 16
Joined: Wed Mar 16, 2016 2:34 pm

Re: Secondary ignition probes on 4 cylinders

Post by bonecrusher »

Again thanks for the input

I will try your suggestions
Autonerdz wrote:You have only enough capture time for one event
please elaborate

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: Secondary ignition probes on 4 cylinders

Post by Autonerdz »

bonecrusher wrote:Again thanks for the input

I will try your suggestions
Autonerdz wrote:You have only enough capture time for one event
please elaborate
I was referring to the last capture you posted where you have only enough time/div for one ignition event per screen.

bonecrusher
OneWave
OneWave
Posts: 16
Joined: Wed Mar 16, 2016 2:34 pm

Re: Secondary ignition probes on 4 cylinders

Post by bonecrusher »

Got you, thanks.

Still learning the different terms. Spent 10 + hours on youtube watching picoscope vids trying to grasp on what i'm seeing.

Wish I could travel to America for some training. Someday, maybe

Post Reply