Foam Roll Cab Drawer Inserters - Drawer Height needed?

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
User avatar
FioranoCars
TwoWaves
TwoWaves
Posts: 386
Joined: Thu Dec 13, 2012 11:26 am
Location: London, UK

Foam Roll Cab Drawer Inserters - Drawer Height needed?

Post by FioranoCars »

Hi
Can you confirm how "tall" the inserts are / the drawer need to be with items installed?
It's the one measurement missing, but probably the most critical :D

Might be nice to update the store pages with this info too?

Thanks
Richard Lukins
FioranoCars.com

PicoChris
Pico Staff Member
Pico Staff Member
Posts: 15
Joined: Wed Jun 04, 2014 3:31 pm

Re: Foam Roll Cab Drawer Inserters - Drawer Height needed?

Post by PicoChris »

The foam inserts are 40 mm thick to fit in 45 mm and 50 mm deep drawers

User avatar
FioranoCars
TwoWaves
TwoWaves
Posts: 386
Joined: Thu Dec 13, 2012 11:26 am
Location: London, UK

Re: Foam Roll Cab Drawer Inserters - Drawer Height needed?

Post by FioranoCars »

Thanks, for the swift reply
found a roll cab with 60mm drawers, so will be ideal.

So while Santa might be a little late, the new 4 series is getting closer to being in the workshop :D :D
Thanks
Richard

Post Reply