Lancia Delta 2.0 multijet diesel

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
Dejan
OneWave
OneWave
Posts: 46
Joined: Sat Jun 07, 2014 10:00 pm

Lancia Delta 2.0 multijet diesel

Post by Dejan »

Hello all,
problem is Lanci Delta with Fiat 2.0 16v multijet diesel engine,170 bhp,2009. year.The car have specific problem.During
decceleration ONLY car goes to limp mode becouse ECM register DTC: P010F-air mass/air flow meter incongruence.Beside that car doesn't have any other issues,dtc or any driveability problems.

I have checked air leaks and didn't find any faults.

I scope MAF and I didn't find anomaly in signal.It looks very fine to me.

I suspect that maybe air filter make some kind of air disturbance to measurement element of MAF sensor...

Any other ideas or need for more info about car or problem?

Best regards Dejan
Attachments
Capture.PNG

PicoPhil
Pico Staff Member
Pico Staff Member
Posts: 71
Joined: Thu Dec 23, 2010 11:38 am

Re: Lancia Delta 2.0 multijet diesel

Post by PicoPhil »

Hi
Thanks for your post on the forum group.Have you looked on the waveform library for anything to help. Although we do not have Lancia vehicles in the UK the FCA group share the same engine technology.
Have you since fixed this problem with the car.
Thanks
Philip

Post Reply