trigger

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
formation64
Newbie
Posts: 1
Joined: Mon Mar 16, 2015 2:28 pm

trigger

Post by formation64 »

I try to triggering a crank signal ac with a missing teeth and i want a missing teeth trigger How can i do that?

User avatar
hexibot43
TwoWaves
TwoWaves
Posts: 123
Joined: Tue May 10, 2011 5:27 pm
Location: Redwood City, Californa, USA

Re: trigger

Post by hexibot43 »

How about Interval trigger? I haven't ever tried this myself because I'm usually looking at the relation between cam and crank, and so trigger off the cam. Pico scope has so many Advanced triggers I'm sure you could figure a way to do it.

https://www.picotech.com/library/oscill ... l-triggers

Good Luck

Post Reply