Channel ID (Green or Red Lights)

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
James Dillon
Newbie
Posts: 2
Joined: Mon Dec 07, 2009 5:52 pm

Channel ID (Green or Red Lights)

Post by James Dillon »

Hi Team

I am using the new scope a little bit over the past few weeks. 6.9.16.23 software.

When I use the channel 'is it in' feature, the on screen prompts stay active (but greyed out) even when I have switched off the option when I am replaying a capture or live scoping.

Image

Any ideas?

Cheers

James

PicoMike
Pico Staff Member
Pico Staff Member
Posts: 338
Joined: Mon Jan 31, 2011 11:22 am
Location: UK

Re: Channel ID (Green or Red Lights)

Post by PicoMike »

James Dillon wrote:Hi Team

I am using the new scope a little bit over the past few weeks. 6.9.16.23 software.

When I use the channel 'is it in' feature, the on screen prompts stay active (but greyed out) even when I have switched off the option when I am replaying a capture or live scoping.

Image

Any ideas?

Cheers

James
Hi James,

I'll flag this to Development, and also will mention to Tech Support to see if we can re-create this,


Thanks,

Mike
Mike Valentine
Online BDM: Pico Technology

Post Reply