Volvo/Ford cam and crank correlation

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
volrem
TwoWaves
TwoWaves
Posts: 243
Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia

Volvo/Ford cam and crank correlation

Post by volrem »

Hi guys.

Does anyone have known good cam and crank correlation capture for Volvo 1.8L B4184S8 engine?

It's Ford engine on 2006 V50.


FIle with unknown condition attached.

Thanks
Attachments
B4184S8 2006 V50 crank + cam correlation unknown.psdata
(1.35 MiB) Downloaded 737 times
Last edited by volrem on Fri Jun 20, 2014 6:24 pm, edited 1 time in total.

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1581
Joined: Sun Aug 25, 2013 7:22 am

Re: Volvo cam and crank correlation

Post by Steve Smith »

Hello Volrem, thanks for the post.

I have just checked through my library here with no joy. This would be a great opportunity for a possible upload of this waveform to the waveform library.

I have checked and whist there are a number of Volvo cam and crank signals, none for this model.

Can anyone assist here and upload as per

http://www.picoauto.com/support/topic10063.html

Take care......Steve

volrem
TwoWaves
TwoWaves
Posts: 243
Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia

Re: Volvo cam and crank correlation

Post by volrem »

I think Ford engine codes should be QQDB and Q7DA. Installed on Focus and C-Max

1.8 92 kW

volrem
TwoWaves
TwoWaves
Posts: 243
Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia

Re: Volvo/Ford cam and crank correlation

Post by volrem »

I found a waveform from iATN for 2.0L Ford Focus and it's excactly the same.
So it makes me think that timing is correct.

But maybe someone has one for 1.8 L engine and can confirm.

Post Reply