diesel injectors

Ask for and share advice on using the PicoScope kit to fix vehicles here.
User avatar
Robski
Advanced User
Advanced User
Posts: 597
Joined: Tue Sep 14, 2010 6:36 pm
Location: Yorkshire

Re: diesel injectors

Post by Robski » Mon Jan 27, 2014 8:04 pm

resistance across both pins & 1 pin each to injector body ?

glenn
OneWave
OneWave
Posts: 21
Joined: Mon Jul 02, 2012 7:59 pm

Re: diesel injectors

Post by glenn » Mon Jan 27, 2014 8:50 pm

Hi Robski

I have two injectors to hand one reads 6.9 ohms
the other reads 165.3 k ohms

Glenn

User avatar
Robski
Advanced User
Advanced User
Posts: 597
Joined: Tue Sep 14, 2010 6:36 pm
Location: Yorkshire

Re: diesel injectors

Post by Robski » Mon Jan 27, 2014 9:04 pm

so which one rings alarm bells with you ??

resistance to body from any pin ??

glenn
OneWave
OneWave
Posts: 21
Joined: Mon Jul 02, 2012 7:59 pm

Re: diesel injectors

Post by glenn » Mon Jan 27, 2014 10:23 pm

Ah right, I see where your coming from now Rob, brilliant

many thank's for that :D


Glenn

antthecat
TwoWaves
TwoWaves
Posts: 70
Joined: Fri Dec 23, 2011 8:58 pm

Re: diesel injectors

Post by antthecat » Sun Feb 02, 2014 7:32 pm

Seems like injector c is ok by the ecu, why not scope a good(?) one before ripping it to bits (and best of luck with that).

Once running scope a new one, that will be your reference from then on, unfortunately knowing what's good/bad comes from experience and time taking good ones.

glenn
OneWave
OneWave
Posts: 21
Joined: Mon Jul 02, 2012 7:59 pm

Re: diesel injectors

Post by glenn » Sun Feb 02, 2014 9:58 pm

antthecat wrote:Seems like injector c is ok by the ecu, why not scope a good(?) one before ripping it to bits (and best of luck with that).

Once running scope a new one, that will be your reference from then on, unfortunately knowing what's good/bad comes from experience and time taking good ones.
Hi Antthecat
When I started removing the injectors three came out not without ease, had access to an hydraulic puller but the last one pulled out from the threads of the nozzle, so I've removed the engine just to get the head off just so the rest of the injector can be machined out, sorry I'm rambling on (need to get it off my chest) anyway once the engine is back in place I will rescope the injectors and post the before and after on here.

Just out of interest will you be going to the toptechnician event at merc benz world in may, or anybody else on this forum

Cheers All

Glenn

Post Reply