looking for a known good for 2.0 hdi 307 2001 if anyones got one I would be gratefull, I will post one ive got and if anyone cares to take a look to see if its good that would be great
I have a RHY from my peugeot partner but the cam profile is not the same. I'll see tommorow if I have a known good signal for you.
What is the problem with the car? I see that the voltage and rpm's are a bit low. This can cause a non starting engine. Had a couple of these cars with a bad starter. Too low starting rpm's will lead to an engine that won't start.
thanks arjen if you have a known good that will be great, think the bat was a bit low when I took this capture, I think the voltages may be low due to me not having the scope connected properly, I will hopefully get on it on sat and get some more testing done.
got another capture here if you want to take a look though still had the scope leads connected wrong with the earth(black) on one side of the crank sensor and the main(red) on the other
I have a known good waveform, but somehow it will not upload.. I'll try uploading again later.
If you send me your email I can also mail you the waveform.
The timing in your waveform is not correct.
hi guys just realised/remembered I had posted this here? the only codes were camshaft sensor codes I suspect a correlation code, and its showing no sync with cam/crank on diag, timing was checked and found good when pinned up and is still not showing as sync'd, its still in bits and my customer has a loan car for now and will prob not get back on it till a later date. but I will be back on it, also customer had said he was looking for a new car anyway and if he does get one I will be keeping this so I can figure it out cause its def got me on the run at the min