how to use 2000 A current probe

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Hoseung
Newbie
Posts: 5
Joined: Fri Apr 12, 2013 12:59 am

how to use 2000 A current probe

Post by Hoseung »

Hi

I just purchased and I am now using Pico scope 4000 series.
2000 A current probe is in need and I found corresponding probe in this web site.
I am curious how to connect the 2000 A current probe to the BNC connector of Pico scope 4000 series.
Please introduce additional thing to connect them.
Thanks.

Best regards,

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: how to use 2000 A current probe

Post by Martyn »

You will need MI078: BNC Plug to 4 mm Adapter or equivalent

This can be found 4 items down on this page http://accessories.picotech.com/test-leads.html
Martyn
Technical Support Manager

Alan
Pico Staff Member
Pico Staff Member
Posts: 264
Joined: Thu May 25, 2006 8:02 am

Re: how to use 2000 A current probe

Post by Alan »

Another option is to plug the clamp into one of our BNC to 4mm test leads as supplied in all the automotive kits.

Post Reply