how to perform an alternator ripple test

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.

how to perform an alternator ripple test

Postby Pinpoint » Wed Jan 16, 2013 3:23 pm

Can you please explain how to perform anmd set up an alternator ripple test for a picoscope 4423

Also the correct settings to perform alternator current output.

many thanks
Posts: 3
Joined: Fri Dec 21, 2012 10:56 pm

Re: how to perform an alternator ripple test

Postby Martyn » Thu Jan 17, 2013 11:53 am

Open the software, click on Automotive->Charging and Starting->Charging Circuits and then select the ripple test.

You should now have a page that discusses the test, connections and sample waveform; and the scope will have been configured with the correct settings. If not then please ensure that ShowWebHelp is ticked on the Automotive drop down.
Technical Support Manager
Pico Staff Member
Pico Staff Member
Posts: 254
Joined: Thu Aug 11, 2011 9:43 am
Location: Cambridgeshire

Return to Automotive kit hardware

Who is online

Users browsing this forum: No registered users and 0 guests