frequency test

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
eric989
OneWave
OneWave
Posts: 35
Joined: Fri Apr 16, 2010 6:53 am
Location: Hongke China

frequency test

Post by eric989 »

Hi,

As we know the PicoScope 6 can test frequency by selected "frequency" from the drop down menu with AC/DC option. But I found that the "frequency" option gone. Did Pico delete this test? Many thanks.
Eric Chen
Hongke Technology,China

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: frequency test

Post by Martyn »

You will only see this option when a 4000 series automotive scope is connected to the software.
Martyn
Technical Support Manager

Alan
Pico Staff Member
Pico Staff Member
Posts: 264
Joined: Thu May 25, 2006 8:02 am

Re: frequency test

Post by Alan »

All scopes also have the option of measuring / plotting frequency using the maths channel options built into PicoScope software as well. The 4000 series has both options (hardware and software).

Post Reply