4 channel pico attenuators

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
JIMMILLINER
Newbie
Posts: 3
Joined: Tue May 08, 2012 5:11 am

4 channel pico attenuators

Post by JIMMILLINER » Wed Jun 13, 2012 12:48 pm

If you use 4 attenuators on an automotive pico , say to monitor 4 injectors or primary ignition signals ; is there any signal degradiaton or interference?

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 336
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA
Contact:

Re: 4 channel pico attenuators

Post by Autonerdz » Wed Jun 13, 2012 3:03 pm

Hi Jim,

No, there is no signal degradation, provided that the attenuators are attached directly to the scope module and the scope is grounded to bat neg.
Tom Roberts
(The Picotologist)
Autonerdz

JIMMILLINER
Newbie
Posts: 3
Joined: Tue May 08, 2012 5:11 am

Re: 4 channel pico attenuators

Post by JIMMILLINER » Sat Jun 16, 2012 2:14 am

thanks :D

Post Reply