4 channel pico attenuators

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
JIMMILLINER
Newbie
Posts: 3
Joined: Tue May 08, 2012 5:11 am

4 channel pico attenuators

Post by JIMMILLINER »

If you use 4 attenuators on an automotive pico , say to monitor 4 injectors or primary ignition signals ; is there any signal degradiaton or interference?
Top
User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: 4 channel pico attenuators

Post by Autonerdz »

Hi Jim,

No, there is no signal degradation, provided that the attenuators are attached directly to the scope module and the scope is grounded to bat neg.
Tom Roberts
(The Picotologist)
Autonerdz
Top
JIMMILLINER
Newbie
Posts: 3
Joined: Tue May 08, 2012 5:11 am

Re: 4 channel pico attenuators

Post by JIMMILLINER »

thanks :D
Top
Post Reply

Return to “Automotive kit hardware”