PicoDiagnostics result

Ask any non-NVH related questions about using PicoDiagnostics software here.
Post Reply
eric989
OneWave
OneWave
Posts: 35
Joined: Fri Apr 16, 2010 6:53 am
Location: Hongke China

PicoDiagnostics result

Post by eric989 »

Hi all,

I made a cylinder balance test by PicoDiagnostics software (comes with PicoScope6 version: 6.6.16.12
).Channel B pluged in ignition signal as trigger. My PicoScope is 4223.

But I cann't see the trigger signal and speed curve. I think that something must be wrong in the software. And notice this problem of previous version have been discussed in other thread here.

Attached my files here.
PicoDiagnostics.jpg
And how to understand the blue bar for variation ? Does the blue bar longer, then the cylinder contribute more ? Can somebody make a detail interpretation for me ?

Many thanks !
Eric Chen
Hongke Technology,China

Jabsam
OneWave
OneWave
Posts: 25
Joined: Wed Mar 09, 2011 1:17 pm

Re: PicoDiagnostics result

Post by Jabsam »

I want to know the answer too. Hopefully someone can reply it.

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: PicoDiagnostics result

Post by Martyn »

I would suggest updating to R6.6.28 which is labelled as the Release Candidate on our website http://www.picoauto.com/software.html to resolve your missing traces.

The blue bar for variation is currently just showing the min and max values for each cyclinder, I believe this functionality may be expanded in the future.
Martyn
Technical Support Manager

Post Reply